RG-W12000A Robotic Fiber Laser Welding Machine

Q: With 12 kW laser power, what thicknesses can be welded in a single pass?

With proper fixturing and heat management, deep penetration up to ~40 mm in stainless steel can be achieved in a single pass; for thicker sections, multi-pass strategies are used.

Q: Can the RG-W12000A use a laser–arc hybrid (laser-MIG/MAG) process?

Yes. By combining the penetration advantage of the laser with the filler capacity of the arc, productivity increases in thick joints and applications with higher gap tolerance.

Q: What is the typical welding speed range at 12,000 W?

Depending on material and joint type, typical speeds are 0.6–2.5 m/min; for flat butt welds, higher speeds can be achieved.

Q: Does the system include seam tracking and automatic focus adjustment?

Optional camera/LiDAR-based seam tracking and dynamic focus control enable precise seam centering even under 3D tolerance deviations.

Q: What are the electrical and cooling capacity requirements for the 12 kW laser?

Three-phase industrial power supply and a high-capacity water cooling unit (≥30 kW heat removal) are recommended; exact values are confirmed after project evaluation.

Q: How does the RG-W12000A perform on titanium and nickel superalloys?

With high power density and controlled heat input, it minimizes porosity risk; inert gas management prevents oxidation and ensures clean welds.

Q: Which shielding gases and nozzle types are recommended?

For stainless steel, Ar/N₂ mixtures are recommended; for aluminum, He or He-rich mixtures. Wide laminar-flow nozzles are preferred for extended coverage.

Q: What are the edge preparation and gap tolerance limits?

For narrow butt joints, a gap of <0.2 mm is ideal; in hybrid laser–arc processes, the acceptable gap tolerance can be increased.

Q: How can optical protection and lens lifetime be extended?

By using a protective cover glass and a positive-pressure gas curtain; contamination sensors ensure timely replacement.

Q: Does it support Industry 4.0 integration and data collection?

Yes. Real-time monitoring, part recipe management, and quality data logging are supported via OPC-UA and Profinet/EtherNet-IP.

The RG-W12000A is a high-power (12,000 W) robotic fiber laser welding solution developed for manufacturers that need very deep weld penetration, high structural strength and continuous robotic operation.
With its reinforced robotic structure and industrial cooling system, it delivers stable results even in long welding cycles on thick plates such as 30–40 mm structural steel, stainless steel and high-strength alloys.

Lazer Kaynağının, Geleneksel Kaynak Yöntemlerinden Farkı Nedir?

Okumak İçin Tıklayınız

	Diğer Kaynak Yöntemleri	Lazer Kaynak
Malzemeye İşlenen Sıcaklık	Çok Yüksek	Düşük
Malzemedeki Deformasyon %'si	90%	5%
Malzemedeki Kaynak Mukavemeti	Düşük	Yüksek
Kaynak Sonrası Tesfiye İşçilikleri	Taşlama, Parlatma, Polisaj	Yok veya %10 Taşlama
Kaynak Hızı	10%	%90 (8kat'a kadar daha hızlı)
Kullanım Zorluğu	Karmaşık ve Ustalık İsteyen	Basit ve Ustalık Gerektirmeyen
Sarf Malzeme Gideri	Yüksek	Az
Operatör Güvenliği	Yok	Üst Düzey
Kaynak Genişliği	Sabit	Ayarlanabilir 0.8mm - 5mm
Tel Besleme	Var	Beslemeli veya Beslemesiz Kullanabilme
Kaynak Nufuziyeti	Sabit	Ayarlanabilir 0mm - 8mm
Enerji Tüketimi	Yüksek	Düşük
Çevreye Etkisi	Çevre Kirliliğine Yol Açar	Çevre Dostu

Teknik Parametreler

Okumak İçin Tıklayınız

● Farklı Kaynak Modu
● Türkçe Dil Desteği
● Punta Modu
● Detaylı Arıza Ekranı
● LED Uyarı Sistemi
● Kesim Modu
● Temizleme Modu
● 5 mm’e Kadar Lazer Işık Genişliği
● Ayarlanabilir Lazer Nokta Boyutu

● Bakım gerektirmeyen yapı

● Yüksek hız ve hassasiyet

● Yüksek Güç Verimliliği
● Frekans Stabilitesi
● Yüksek Işın Kalitesi
● Termal Stabilite
● Yüksek Güç Yoğunluğu
● Dayanıklı ve Uzun Ömürlü Yapı
● Optik İzolasyon

● Punta Modu
● Kesim Modu
● Temizleme Modu
● Kaynak Modu

Katalog

Product Value Added

Ultra-high 12kW laser performance enables single-pass welding on very thick sections and large-volume welded structures.
Robotic flexibility allows welding of complex geometries, large parts and multi-position welds.
Stability and repeatability: the integrated control system and precise motion axes keep weld quality constant during long production runs.
Energy efficiency: fiber laser architecture offers high optical efficiency and lower operating costs compared to conventional welding technologies.
Process safety: integrated monitoring and cooling protect the laser module and extend service life.

Highlighted Technical Features

Laser Power: 12,000 W
Laser Wavelength: 1070 nm
Intelligent robotic welding + automatic positioning
Maximum weld penetration (steel): up to 40 mm
Industrial-grade water cooling unit
Multi-mode CW / Continuous Wave / Pulsed welding
24/7 operation capability
Heavy-duty mechanical frame for robotic applications

Sectoral Application Areas and Case Studies

Heavy steel construction & shipbuilding: long weld seams on thick plates, corrosion-resistant and high-strength joints.
Power & offshore structures: welding of large-diameter pipes, pressure vessels and support frames.
Defense and military vehicles: thick armor plates, ballistic protection parts, special alloy components.
Mining and construction equipment: high-load-bearing chassis, buckets and structural parts.
General fabrication: any production where 6kW is not enough and 12kW deep penetration is required.

Comparative Analysis – Rgwel vs Global Competitors

Feature	RG-W12000A	Global Brand A	Global Brand B
Laser Power	12,000 W	12,000 W	12,000 W
Max. Weld Depth	40 mm	32 mm	30–35 mm
Robotic Flexibility	6-axis	4–6 axis	4–6 axis
Energy Efficiency	High (fiber)	Medium	Medium
Cooling System	Integrated industrial water cooling	External	External
Service Interval	750 h	750 h	750 h
Control Panel	Multi-language, CNC-based	Limited	Limited

Buying Guide – Robotic Fiber Laser Welding Machine

When selecting a 12 kW fiber laser welding system, pay attention to:

Material thickness & type: 12 kW power is ideal for 25–40 mm steel, stainless and high-strength alloys.
Production method: if you are running 24/7 robotic lines, the integrated water cooling and stable optical path of the RG-W12000A will reduce downtime.
Automation integration: the system can be integrated into existing robotic cells, positioners or gantry systems.
Service & training: Rgwel offers on-site commissioning, operator training and remote technical support.

You can request a free demo, test your own parts and get laser parameters optimized by Rgwel engineers.

How can we help?

For questions or quote requests, you can reach us via the contact form or call our number for the fastest support.

Request a Quote

+90 262 503 07 41

Turkey’s Leading Laser Technology and Machine Manufacturer – Rgwel

Rgwel offers high-precision, energy-efficient, and long-lasting solutions in laser welding, laser cutting, laser marking, laser cleaning, and robotic laser systems.
Discover the most suitable laser machine for your needs from the categories below.

RG-W12000A